How to upgrade the firmware on your D-Link router -D-Link DAP-1360 AP Firmware Download latest ver

D-Link DAP-1360 AP Firmware Download latest ver
How to upgrade the firmware on your D-Link router

About Access Point Firmware:
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

DAP-1360 Access Point Firmware- D-Link DAP-1360 AP Firmware- D-Link DAP-1360 Firmware DAP-1360 rev.C1 Firmware- D-Link Access Point

Download Here

D-Link DAP-1360 rev.B1 Access Point Firmware 2.10

Download Here

Problems Resolved:

1. Sometimes WDS interface cannot bring up successfully in WDS with AP mode

Installation Procedure:

- Save the downloadable package.

- Log into the router’s web user interface.

- Navigate to the firmware upgrade section of your wireless unit.

- Select the present firmware and configure your router to install this file.

- Wait as the device carries out this process.

- Reboot the unit if required.

dlink access point dap 1360 firmware download
d link dap 1360 firmware f1
dlink dap 1360 firmware download
dlink dap 1360 configuration
d link 1360 access point
d link wireless open access point router dap 1360 b black
d link dap 1360 range
d link dap 1360 repeater
dap-1360 openwrt
dap-1360 c1 firmware download
how to upgrade firmware dap 1360
dap-1360 manual download
d-link 1360 access point
d-link dap-2020 setup
d'link dap 1360 configuration
d-link repeater
d-link firmware download
dap-1360 price
d'link dap 1360 review
access point indoor

1